产品名称:堵涂(抗渗速凝粉)
产品说明:本产品为活性化学成份配制而成的灰色粉料,加入提高强度、粘结力 的有效成份,防水层和水泥基面结合强度高、抗渗性好,凝固速度快本产品在潮湿 环境中会不断的生成活性物尻长期有效的对水泥混泥土结构的雜孔之间起到修 复作用,与水混合施工^可提_面的耐水性具有防霉、抗渗、抗泛喊的功能.
产品恃点:时间越久硬度越高,粘结力越强.
不开裂、抗老化、不起粉.
采用高级原料,环保无毒、抗渗效果好、快速止水.
可在潮湿基面±JS工有长期自我修复。
适用范围1.堵涂背水面防水涂料的打底使用.
2.建筑各个部位的裂缝、孔洞、管根、基面渗漏潮湿等问题的防水补 漏.
? 3.阴阳角防水施工.
4.工麵水补漏?
使用方法:加水后基面直接涂刷使用.
湿度较大的基面可以将粉料直接干洒面粉料和水接触后进行固化反应.
最佳加水比例参考:2KG/袋加0.6~0.8KG7jC,损拌均匀直接使用,固化时间为半小时 内(根据天气情况,气温越高,固化时间越短)
可根据实际情况适当调整加水比例,建议不要加太多水以免影响固化后的硬度.
注意事项:本产品与水混合后,凝固速薇快,建议与水混合后迅速用m
储存方式:存放于干燥阴凉处#注意防潮.
M : 2kg/袋
抗渗速凝粉…-2KG/袋…工程装产品(每箱10袋)
Product Name: Blocking coating (impregnated quick-setting powder)
Product Description: This product is a gray powder prepared active chemical components. It is added with effective ingredients for improving strengthadhesion. The waterproof layercement base have high bonding strength, good impermeabilityfast solidification. The product is wet. The environment will continuously produce active substances,the long-term effective effect on the repair of the pores of the cement concrete structure,the mixing with water can improve the water resistance of the surface with anti-mildew, anti-seepageanti-shock Features.
Product defects: the longer the time, the higher the hardness, the stronger the adhesion.
No cracking, anti-aging, no powder.
Using advanced raw materials, environmentally friendly, non-toxic, anti-seepage effect, fast water stop.
It has long-term self-healing on the wet base ±JS.
Scope of application 1. The use of primers for waterproofing coatings on the back surface.
2. Waterproof leakage of cracks, holes, tube roots,base surface leakage of various parts of the building.
3. Waterproof construction of yinyang angles.
4. Working face water trapping?
How to use: Apply directly to the base after adding water.
The base surface with higher humidity can directly dry the flourcontact the waterthen cure.
The best water addition ratio reference: 2KG/bag plus 0.6~0.8KG7jC, the damage mixing is used directlythe curing time is within half an hour (according to the weather conditions, the higher the temperature, the shorter the curing time)
The proportion of water added can be adjusted according to the actual situation. It is recommended not to add too much water to avoid affecting the hardness after curing.
Note: After mixing with water, the solidification speed is fast. It is recommended to mix with wateruse m quickly.
Storage: Store in a drycool place # pay attention to moisture.
M : 2kg / bag
Anti-seepage quick-setting powder...-2KG/bag...engineering products (10 bags per case)
来源:聚王牌防水网
扫描二维码关注防水材料招商网公众号
找项目,看防水行业资讯,浏览防水信息更方便
(目前已被2万人关注)